Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateFast, Reliable Garage Door Installation Across Richmond
If your door is overdue for replacement, a new sectional door in Richmond typically runs $700 – $2,200 installed, sized to the opening and quoted in writing before any work starts. We know the city block by block, from the tight alleys off the Fan to the wide, standard openings out in Chesterfield and Henrico. That matters here because so many Richmond garages were built for a different era of car, not a modern insulated door. Whether your opener is a decade-old Craftsman or a new LiftMaster, we install the door and the motor together so you’re not handed between companies when something changes. Call (833) 508-9230 and we’ll set up a free measure and a written price.

Why Richmond Homeowners Call Richmond Garage Door Repair Co for Garage Door Installation
We’re brand-neutral by design. We install and work on equipment from Clopay, Amarr, Wayne Dalton, Raynor, LiftMaster, Chamberlain, Genie and Craftsman, so the recommendation you get is based on how the door fits your opening, not on what a single dealer happens to stock. That neutrality matters most in the old city stock, where a standard catalog door often fights an opening that settled decades ago.
Our technicians have up to 13 years of experience, and spring work stays a named, dedicated service rather than an afterthought filed under “repairs.” We install new doors and fix the ones already on your house under the same roof, so a customer isn’t passed off mid-project.
Richmond customers reach us at (833) 508-9230, and we respond quickly across the region. Installation jobs are measured, ordered and scheduled rather than rushed, but once a date is set we show up ready to work. If a door fails and stops being a door you can close, our emergency garage door service exists for exactly that. Estimates are free.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Our Garage Door Installation Services in Richmond
Most of the work we do in Richmond starts with a measurement, not a sales pitch. We look at the opening, the header, the track and how the door needs to travel before we recommend a system.
New Door Installation
A full new door installation in Richmond runs $700 – $2,200 typical, depending on size, material and whether the opening needs prep. Old brick headers and settled masonry in the Fan and Museum District can require custom sizing that a standard door won’t accommodate. We measure and order to fit rather than forcing a mass-market door into an opening that will pull it out of balance.
Single Car Door
Single-bay doors are the norm in the older city stock, especially where narrow 1920s carriage house openings still stand. A single door keeps the weight down and fits tighter spaces that a double would never clear. We match it to the opener so the door and motor are balanced from day one.
Double Car Door
Newer subdivisions in Chesterfield and Henrico usually carry standard 16×7 openings where a double door drops in cleanly. Those doors are heavier, so spring sizing and opener capacity matter as much as the panels. We spec the spring and the motor to the door, not the other way around.
Custom Garage Door
Out-of-square brick openings mean a custom door is often the only honest answer. We size to the actual opening, then add structural judgment on track alignment and reinforcement where the masonry has moved. If you’re working behind historic-district rules, we plan for the door to look right from the alley, not just open and close. Learn more on our garage door installation hub.
Trusted Brands We Service in Richmond
We install and repair equipment from Clopay, Amarr, Wayne Dalton, Raynor, LiftMaster, Chamberlain, Genie and Craftsman. That covers the modern smart-home opener ecosystem (LiftMaster and Chamberlain) as well as legacy and manual systems still turning in older Richmond garages. We don’t stock parts locally or keep doors sitting in a warehouse. What we do is measure, order the right unit for the opening, and fit it so today’s door and tomorrow’s repair are handled by the same people. If your opener is a decade-old Craftsman or a new LiftMaster with Wi-Fi, we know the system in front of us.

See the difference
Before
After
Before
After
Before
AfterCommon Garage Door Installation Problems We See in Richmond Homes
- Salt air near the coast attacks springs, hinges and rollers years before inland hardware fails. Torsion springs snap and rollers seize early, so we fit galvanized and coated springs with stainless fasteners wherever the exposure calls for it.
- Out-of-square brick openings in Fan and Museum District carriage houses force custom sizing. Force a standard door into an irregular opening and you get bad track alignment and a door that won’t balance.
- Heavy spring pollen and January ice storms wear cables and weather seal faster than homeowners expect. Frayed cables and drafts follow, and freezing nights spike broken extension springs.
- Undersized, out-of-square openings behind historic-district rules leave little room for error. The wrong material choice or wrong track layout shows up as a door that binds against its own frame.
Pricing for Garage Door Installation in Richmond, VA
Installation pricing here is per door, measured to your opening, and the written estimate sets the final price. A typical new door installation in Richmond runs $700 – $2,200, and custom sizing for an old brick carriage house sits in that same band because the extra work is often offset by simpler hardware. Steel doors typically land in the $700 – $2,200 range for the same reasons, wood doors do too, and a custom garage door carries the same $700 – $2,200 typical range when the opening needs it. What moves you toward the top of the range is door size, material weight, any structural reinforcement and the spring and opener spec pulled along with it. The price is quoted and agreed before any work starts. If a repair will do the job, we’ll say so.
| Service | Typical Estimated Range |
|---|---|
| New Door Installation | $700 – $2,200 |
| Custom Garage Door | $700 – $2,200 |
| Steel Doors | $700 – $2,200 |
| Wood Doors | $700 – $2,200 |
| Opener Installation | $250 – $550 |
| Spring Repair (one spring) | $180 – $340 |
A matched spring pair costs about twice the single-spring range because both are usually replaced together.
We Also Serve Cities Near Richmond
We work across the region around Richmond and out to Montrose, Tuckahoe, East Highland Park and Dumbarton, each with its own mix of old brick garages and standard openings. If you’re just outside the city line, we can still measure and quote your door. Call (833) 508-9230 to check your address and set up a free estimate.
Serving Richmond, VA – Our Local Coverage Area
We serve Richmond and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Garage Door Installation in Richmond
Salt air corrodes springs, hinges, rollers and opener chains years faster than inland exposure does, so hardware wears out sooner and snaps earlier. We fit galvanized or coated springs, nylon rollers and stainless fasteners wherever the exposure calls for it, and we check corrosion on every visit. Call (833) 508-9230 for an assessment.
Yes. We custom-size to the actual opening and reinforce where the masonry has settled. The tight 1920s brick openings in the Fan and Museum District demand judgment calls that standard 16×7 openings never require, so we measure the real opening and plan track alignment around it. Call (833) 508-9230 for a free measure.
Galvanized or coated torsion springs hold up best in Richmond’s humid summers and freezing winter nights, which is why we default to them on most installs. A matched pair is usually replaced together, and each spring runs $180 – $340 typical. Call (833) 508-9230 for a quote.
Once a year is a sensible baseline here, given the salt air and heavy spring pollen. Look for rusty hinges, seized rollers and frayed cables, and call us if anything feels stiff or the door won’t balance. Call (833) 508-9230 and we’ll inspect and quote.
Expect a measured job that plans around a narrow, settled brick opening. The technician often hand-carries a torsion spring and tools a block or more when a double-parked car blocks the alley, and many carriage houses lack power, so a generator is brought to every call. After reinforcing the opening and setting custom track alignment, the door is balanced and spring cycles are verified. Call (833) 508-9230 to schedule a free measure.
Ready to replace a worn door with one that fits your Richmond opening and stands up to the local climate? Call (833) 508-9230 for a free estimate. We measure, spec the door and the opener together, and quote the price in writing before any work starts.
Written by the team at Richmond Garage Door Repair Co.