Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateTrusted Garage Door Installation for Richmond Homeowners
A garage door that drags, sticks, or won’t stay closed is a daily problem you feel every time you pull out of the driveway. When repairs stop making financial sense, a new door restores security and curb appeal at the same time. Our technicians have up to 13 years of experience, and we work on the brand already in your garage rather than steering you toward whatever a single manufacturer pushes. We install steel, wood, single car, double car, and custom doors across Richmond, and we quote the full job in writing before anything is ordered. Whether your opener is a decade-old Craftsman or a new LiftMaster with Wi-Fi, we’ll match the door and the motor to how you actually use your garage. Call (833) 508-9230 for a free measure and a written estimate.
What Our Garage Door Installation Service Includes
Replacing a garage door is a measured job, not a same-day one. We take the opening measurements, talk through how the door gets used, then order and schedule the install. Here’s what each type of job involves.
New Door Installation
New door installation means removing the old door and its hardware and fitting a complete new system: door, tracks, springs, rollers, and hinges, then setting the opener if one is part of the job. You need it when a door has reached the end of its serviceable life, when repeated panel and track repairs keep adding up, or when you’re changing the look of the front of the house. At Richmond Garage Door Repair Co, we measure the opening first, check how the existing springs and tracks are mounted, and confirm the new door’s weight is matched to a spring system sized for it. That last step is where cheap installs go wrong, and we don’t skip it.

Single Car Door
A single car door covers roughly an eight or nine foot wide opening and is the most common replacement in Richmond’s older neighborhoods, where garages were built for one vehicle. You need one when a single bay door is dented, rusted through at the bottom, or simply too heavy for the opener to lift reliably anymore. We size the torsion springs to the exact weight of the new door, so the opener isn’t straining against a door it was never set up for. For homeowners in Manchester and Bon Air, this is often the simplest, most cost-effective route: one bay, one door, one clean install.

Double Car Door
A double car door spans a sixteen foot opening and carries far more weight than a single, which makes the spring and track setup the critical part of the job. You need one when a wide door sags in the middle, when the panels have been hit more than once, or when you’re converting a two-car garage back to a full-width door. We check the header and the ceiling mounting points before ordering, because a wide door on undersized hardware will fail early no matter how good the panels are. We install double doors across Richmond and the surrounding suburbs, and we set the spring balance so the door lifts by hand without fighting you.

Custom Garage Door
Custom garage doors are built to a non-standard opening size, a specific look, or a detail that matches the rest of the house, such as window patterns or a particular panel profile. You need one when the opening was framed to an odd size, when the house has architectural details a stock door won’t match, or when a historic home needs something that fits its character. We take detailed measurements and confirm the door’s weight and balance point before it’s built, so the springs can be sized correctly from the start. Custom work takes longer to order, which is exactly why we quote and measure first rather than promising a fast turnaround we can’t deliver.
Steel Doors
Steel is the most widely installed door material in Richmond because it holds up well, needs very little upkeep, and comes in a wide range of finishes. You need a steel door when you want a low-maintenance surface that resists dents and won’t need refinishing. We install steel doors from Clopay and Amarr, and we fit them with springs matched to the door’s actual weight, since steel doors vary a lot from one model to the next. We also check the bottom seal and threshold, because a gap there lets in water and pests, which is a common oversight on quick installs.
Wood Doors
Wood garage doors give a warmth and character that steel can’t match, and they suit the older homes found throughout Richmond’s historic districts. You need one when curb appeal matters and you’re willing to keep up with occasional refinishing, since wood needs more care than steel in Virginia’s humid summers. We install wood doors from Wayne Dalton and Raynor and pay close attention to sealing and finish at the base, where moisture does the most damage. If a wood door is on your list, we’ll talk through the maintenance honestly before you commit, not after.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Brands We Service for Garage Door Installation
We’re brand-neutral by design. That means when you ask about a door or opener, the recommendation comes from how you use your garage, not from what’s sitting in a warehouse. We install and service Clopay and Amarr steel doors, Wayne Dalton and Raynor wood and steel options, and we handle openers from LiftMaster and Chamberlain’s smart-home ecosystem as well as legacy Craftsman and Genie systems. If your current opener is a decade-old Craftsman and the new door is heavier, we’ll tell you straight whether the motor can carry it.
We work on the brand already in your garage, which matters most in homes with mixed equipment. A property manager with several units might have Chamberlain openers in one building and Genie in another, and we can service both without handing the work to a different company. Whether you have LiftMaster, Chamberlain, Clopay, Amarr, Wayne Dalton, Craftsman, Raynor, or Genie, we can help. If you’re also sorting out a failing motor, our garage door repair service covers openers and the door system together, so nothing gets lost between two companies.
Signs You Need Garage Door Installation Right Now
Repair first, replace only when it makes sense. These are the signs that tip a job from a repair into a replacement.
- The door sags or bows in the middle. A visible curve across a wide door usually means the panels or the structure behind them have given way, and tightening the hardware won’t straighten it. It’s a sign the door and its supporting hardware are past the point of a simple fix.
- Panels are cracked, rusted through, or separating. One dented panel can often be replaced, but when several panels are failing at once, the cost of piecemeal repairs climbs toward the price of a new door. Rust at the bottom edge is the one to watch, because it spreads and weakens the panel’s structure.
- The door shakes or jerks when it moves. Rattle and jerking can point to worn rollers or a bent track, but when the door itself is warped, new hardware on a warped door still won’t run smoothly. We check the alignment of the door and the tracks before recommending either repair or replacement.
- Repeated repairs on the same door. If you’ve had the springs, cables, or panels fixed more than once and something else fails soon after, the door is telling you it’s done. Replacement is often the cheaper path over the next couple of years.
- The door won’t close securely and gaps show at the sides. A door that leaves daylight around the edges lets in water, pests, and cold air, and it compromises the seal on the house. This one has a security side to it as well, since a door that doesn’t sit flat can be pried more easily.
Our Garage Door Installation Process – Step by Step
Every install follows the same sequence, so you know what happens and when. Here’s how it runs from first call to final balance.
- 1
Free measure and written estimate. We measure the opening, check the header and the mounting points, and look at how the current opener is set up. You get a written estimate with the door, hardware, and any opener work itemized, and the price is agreed before anything is ordered.
- 2
Door selection and ordering. We walk through steel, wood, single, double, and custom options against your budget and how the door gets used. You pick the look and material, we confirm the weight and balance point so the springs can be matched. This is the stage that takes the longest, because the door has to be built and shipped.
- 3
Scheduling and prep. Once the door arrives, we book an install window and confirm access to the garage. We clear the space under and around the door so the old door and tracks can come out safely.
- 4
Removal and install. We take out the old door, tracks, and springs, then fit the new door, tracks, and a spring system sized to its weight. We set the door balance so it lifts by hand and stays put, and we check the opener’s travel limits and force settings if the opener is being reused or replaced.
- 5
Testing and walkthrough. We cycle the door several times, check the safety reverse and the bottom seal, and test how it sits in the frame. We walk you through the door, the opener, and the maintenance it needs, and the written estimate you agreed to is the price.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Installation Cost in Richmond?
New door installation in Richmond typically runs $700 – $2,200 depending on door size, material, and whether opener work is included. A single car steel door tends to land near the lower end of that range, while a double car or a custom wood door pushes toward the upper end. If your opener needs replacing at the same time, opener installation typically runs $250 – $550 on top of the door.
What moves the price most is door size and material. A single car door uses less material and lighter hardware than a double, and steel is generally less expensive than wood up front, though wood can cost more to maintain over time. Custom sizes and window patterns add to the cost because the door is built to order. The opener is a separate line item: reusing a working opener can save the full opener install, but if your current motor is undersized for the new door’s weight, replacing it is the safer choice.
To avoid overpaying, ask for the door, hardware, removal of the old door, and any opener work itemized in the written estimate. That way nothing shows up as a surprise add-on later. Our free estimate includes the measure, a door recommendation based on fit, and a written price, and the price you agree to before work starts is the price you pay. Call (833) 508-9230 for an exact quote.
Garage Door Installation Near Richmond – Our Service Area
We install doors across Richmond and the surrounding communities, including Manchester, Bon Air, Montrose, Lakeside, East Highland Park, Dumbarton, Bensley, Meadowbrook, Chamberlayne, Rockwood, and Tuckahoe. Installation work is scheduled after the door is measured and ordered, so we confirm a window that fits the day rather than promising a same-day install. If you’re in a nearby area and want to know whether we cover it, call and we’ll confirm. You can also read more about our garage door installation work in Manchester, or the garage door installation service we offer in Bon Air.
Serving Richmond, VA – Our Local Coverage Area
We serve Richmond and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Garage Door Installation in Richmond
Garage door installation is the process of removing an existing door and its hardware and fitting a complete new door system, including the door, tracks, springs, rollers, and hinges, plus opener setup if needed. It’s different from a repair, which fixes a specific failed part on a door that’s otherwise sound. Installation is measured and ordered in advance, so it isn’t a same-day job. Call (833) 508-9230 to set up a free measure.
Most installs take a few hours once the door is on site, but the full timeline from call to finished door is usually longer because the door has to be measured, ordered, and shipped. Custom doors take the longest to arrive since they’re built to your opening. We’ll give you a realistic timeline with your written estimate instead of a guess. Call us for a free measure and a firm schedule.
New door installation in Richmond typically runs $700 – $2,200 depending on door size, material, and whether opener work is included. A single car steel door usually sits near the lower end, while a double car or custom wood door pushes toward the upper end, and opener installation adds $250 – $550 if you need a new motor. The written estimate sets the final price. Call (833) 508-9230 for an exact quote, and estimates are free.
Yes. We service and install openers from LiftMaster and Chamberlain’s smart-home ecosystem, as well as legacy Craftsman and Genie systems, and we set the opener to match the new door’s weight. If your current motor is a decade-old Craftsman and the new door is heavier, we’ll tell you whether it can carry the load before you order. That check is part of every install. Call us to talk through your setup.
We offer dedicated emergency garage door service when a broken door creates an immediate security or access problem, and spring failures don’t wait. Emergency service is for getting a secure, working door back in place, not for a full replacement order, since new doors are measured and ordered in advance. If your door is stuck open or won’t close, call (833) 508-9230 and we’ll get it secured.
Warranty coverage depends on the door and opener you choose, since manufacturers set their own terms and those vary by model. We’ll walk you through the coverage on your specific door and opener in writing as part of the estimate, so you know what’s covered and for how long before you commit. The written estimate is where those details live. Call us to go over the options.
Clear the area under and around the door, move any vehicles out of the garage, and remove items stored on shelves near the door’s tracks. Make sure we can get to the opener and the ceiling mounting points without obstruction. If you have questions about anything unusual, call (833) 508-9230 before the scheduled day.
Schedule Your Garage Door Installation Service in Richmond Today
If your door is sagging, rusting, or has been repaired one time too many, it’s time to measure for a replacement. Our technicians have up to 13 years of experience, and we quote the full job in writing before anything is ordered. Call (833) 508-9230 for a free measure and a no-obligation estimate, and we’ll help you choose a door that fits your garage and your budget.
Written by the team at Richmond Garage Door Repair Co.